Salta al contenuto principale

Roku XD 2050X Remote IR LED Replacement

Cosa ti serve

  1. Roku XD 2050X Remote IR LED Replacement, Remote Control Casing: passo 1, immagine 1 di 2 Roku XD 2050X Remote IR LED Replacement, Remote Control Casing: passo 1, immagine 2 di 2
    • Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.

    • Remove the battery cover.

    • Remove the two AA batteries.

  2. Roku XD 2050X Remote IR LED Replacement: passo 2, immagine 1 di 2 Roku XD 2050X Remote IR LED Replacement: passo 2, immagine 2 di 2
    • Insert flat edge of spudger into seam between the top and bottom halves of the remote control.

    • Gently twist the spudger to separate the top and bottom halves of the remote.

  3. Roku XD 2050X Remote IR LED Replacement: passo 3, immagine 1 di 1
    • Gently use the spudger to pry the circuit board loose.

  4. Roku XD 2050X Remote IR LED Replacement: passo 4, immagine 1 di 1
    • Using either end of the spudger, gently lift and remove the clear keypad backing.

  5. Roku XD 2050X Remote IR LED Replacement: passo 5, immagine 1 di 1
    • Using either end of the spudger, lift and remove the rubber keypad.

  6. Roku XD 2050X Remote IR LED Replacement, Remote IR LED: passo 6, immagine 1 di 1
    • Desolder the two contacts for the IR LED.

    • Remove the IR LED from the circuit board.

    • For help with soldering view the ifixit soldering guide.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 20

Tutti i Tempi: 886