Aggiusta la tua roba Comunità Store

Roku 3 Ethernet Port Replacement

Introduzione

The ethernet port serves as a temporary or permanent solution to connecting to the internet on a network that does have have WiFi. Follow this guide to replace your broken or faulty ethernet port.

Cosa ti serve

  1. Roku 3 Ethernet Port Replacement, Motherboard: passo 1, immagine 1 di 1

    • Place the Roku 3 on the table face down and orient it so you can correctly read the writing.

    Modifica

  2. Roku 3 Ethernet Port Replacement: passo 2, immagine 1 di 3 Roku 3 Ethernet Port Replacement: passo 2, immagine 2 di 3 Roku 3 Ethernet Port Replacement: passo 2, immagine 3 di 3

    • Pull back the rubber protection in the top right corner to locate the screw.

    • Repeat with the bottom right corner and bottom left corner.

    Modifica

  3. Roku 3 Ethernet Port Replacement: passo 3, immagine 1 di 1

    • Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.

    Modifica

  5. Roku 3 Ethernet Port Replacement: passo 4, immagine 1 di 2 Roku 3 Ethernet Port Replacement: passo 4, immagine 2 di 2

    • Open the device by gently lifting the bottom half away from the top half of the device.

    Modifica

  6. Roku 3 Ethernet Port Replacement: passo 5, immagine 1 di 1

    • Use your fingers to carefully lift the motherboard from the top half of the device.

    Modifica

  7. Roku 3 Ethernet Port Replacement: passo 6, immagine 1 di 2 Roku 3 Ethernet Port Replacement: passo 6, immagine 2 di 2

    • Pull away the IO shield from the motherboard using your hands.

    Modifica

  8. Roku 3 Ethernet Port Replacement, Ethernet Port: passo 7, immagine 1 di 2 Roku 3 Ethernet Port Replacement, Ethernet Port: passo 7, immagine 2 di 2

    • Turn over the motherboard so the back is face up and almost all large silver components are resting facedown on the table.

    • Orient it such that the backside of the HDMI port is in your upper right corner.

    Modifica

  9. Roku 3 Ethernet Port Replacement: passo 8, immagine 1 di 1

    • Desolder all of the port's connections with a soldering iron.

    • For more information on soldering, check out iFixit's Soldering Guide.

    Modifica

  10. Roku 3 Ethernet Port Replacement: passo 9, immagine 1 di 2 Roku 3 Ethernet Port Replacement: passo 9, immagine 2 di 2

    • Locate the plastic push-throughs just to the left of the backside of the USB port.

    • Pinch the plastic push-throughs. The port should now be able to be removed.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Andy Hak

Membro da: 10/07/16

250 Reputazione

2 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

Cal Poly, Team 15-2, Livingston Fall 2016 Membro di Cal Poly, Team 15-2, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G2

3 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,563