Salta al contenuto principale

Ridgid GEN5X R8642 Switch Replacement

Cosa ti serve

  1. Ridgid GEN5X R8642 Switch Replacement, Switch: passo 1, immagine 1 di 1
    • Remove the plastic tab holding the handle cover in place by prying upward with the spudger until the tab pops off.

  2. Ridgid GEN5X R8642 Switch Replacement: passo 2, immagine 1 di 1
    • Remove the handle cover by pulling it towards the front of the saw.

    • The grip can sometimes become stuck and may require a decent amount of force to remove.

  3. Ridgid GEN5X R8642 Switch Replacement: passo 3, immagine 1 di 2 Ridgid GEN5X R8642 Switch Replacement: passo 3, immagine 2 di 2
    • Use a T20 Torx screwdriver to remove the nine M4 X 16mm screws from the plastic housing.

  4. Ridgid GEN5X R8642 Switch Replacement: passo 4, immagine 1 di 1
    • Use a JIS #1 screwdriver to remove the two M4 x 25mm screws on both sides of the metal housing.

  5. Ridgid GEN5X R8642 Switch Replacement: passo 5, immagine 1 di 1
    • Remove one half of the plastic housing using a spudger so that the internal system is exposed.

  6. Ridgid GEN5X R8642 Switch Replacement: passo 6, immagine 1 di 1
    • Remove the plastic wire covers to the red and black connections on the switch assembly.

  7. Ridgid GEN5X R8642 Switch Replacement: passo 7, immagine 1 di 1
    • Remove the soldered connection from the switch assembly.

  8. Ridgid GEN5X R8642 Switch Replacement: passo 8, immagine 1 di 1
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 273