Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
identify the exact type of your ThinkPad
-
get the right fan assembly, in this case FRU P/N: 42W2779
-
disconnect power-supply
-
detach battery
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
find all five screws with the shown symbols and unscrew them
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
unscrew all the shown screws
-
These ones are tiny
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
remove the palm rest carefully
-
blow the dust away
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
lift the keyboard carefully
-
Use a spudger to detach the cable
-
lift the keyboad and leave it on the side
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
unscrew the left and right screw of the keyboard bezel and speakers
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
unscrew the first two screws of the shielding
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
carefully lift the wireless antenna cable from the cable guide
-
unscrew the last two screws from the keyboard bezel
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
carefully pull out the keyboard bezel
-
flip the bezel 180°
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
remove the wireless antenna cable from the cable guide of the fan assembly
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
unscrew the fist, tiny screw of the clip
-
unscrew the longer screw of the clip
-
remove the clip
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
remove the shorter screw of the second clip
-
remove the longer screw of the second clip
-
remove the clip
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
remove the last two screws of the fan assembly
-
detach the power cord with a spudger
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
CPU with thermal grease
-
other chip with termal grease
-
carfully lift the fan assembly
-
you may need to pull a little more because of the thermal grease
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
blow the dust away
-
take a spudger and remove the old thermal grease
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
get a paper-wiper
-
wrap the wiper around the spudger
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
get some alcohol on the wiper
-
clean the CPU with the wiper
-
clean the chip with the wiper
-
Ensure there is no old thermal grease left
-
Follow this guide to add new thermal paste to the CPU.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
now place the new fan assembly
-
press down the CPU- and chip-connector
-
don't forget to plugin the power cable of the fan assembly
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.
2 Commenti
This worked perfectly for a couple of my IBM Lenovo R61s. It was spot on except in step 3 you need to remove both screws by the red circles in order to the get inside bezel off, for the R61 anyway. Thanks for the great tutorial!
Excellent guide! It took me less than 1 hour to complete all the steps, and get my R61 up and running again! Thanks a lot