Introduzione

This guide will walk you through step-by-step on how to properly remove and replace the outer shell in the PlayStation 2 Slimline.

    • Turn off the PlayStation 2 (or PS2) and carefully unplug from the power source. Check to see there are no discs inside the console before flipping the game system upside-down.

    Aggiungi Commento

  1. Locate the six feet on the bottom of the PS2.
    • Locate the six feet on the bottom of the PS2.

    • Five of the feet are in plain sight and one of the feet is located under the black void sticker on the bottom of the device.

    • IMPORTANT: Removing the black VOID sticker will void the warranty of this device. Proceed at your own risk

    • Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or even the screw should be in plain sight.

    Aggiungi Commento

    • Use a spudger, flathead screwdriver, or fingernail to pry the five visible feet from the bottom of the device.

    Aggiungi Commento

  2. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath.

    Aggiungi Commento

    • After all of the feet have been removed, locate the six 4.0mm screws on the base of the PS2.

    Aggiungi Commento

    • Use a #1 Phillips screwdriver to unscrew all six 4.0mm screws from the base of the PS2.

    Aggiungi Commento

    • Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves.

    Aggiungi Commento

    • If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Jared Hirata

Membro da: 09/04/2013

480 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 17-4, Regan Spring 2013 Membro di Cal Poly, Team 17-4, Regan Spring 2013

CPSU-REGAN-S13S17G4

3 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 11

Tutti i Tempi: 2,294