Aggiusta la tua roba Comunità Store

Pyle Astro PTBL7C LCD Replacement

Introduzione

The Pyle Astro’s screen is comprised of three layers, the external touch panel, the capacitive touch screen overlay, and the tablet’s LCD. Use this guide to replace your tablet’s LCD.

Cosa ti serve

  1. Pyle Astro PTBL7C LCD Replacement, LCD: passo 1, immagine 1 di 2 Pyle Astro PTBL7C LCD Replacement, LCD: passo 1, immagine 2 di 2

    • Using the plastic opening tool, work your way along the edge of the tablet.

    • The display is held in place by plastic tabs which slide into recesses in the rear plastic panel.

    • Once all clips are released, gently open and separate the front display assembly and the rear plastic panel.

    • Place the front display assembly facing front side down to expose the inside.

    Traduci

  2. Pyle Astro PTBL7C LCD Replacement: passo 2, immagine 1 di 2 Pyle Astro PTBL7C LCD Replacement: passo 2, immagine 2 di 2

    • Remove the three 4 mm JIS #0 screws to release the PCB board.

    Traduci

  3. Pyle Astro PTBL7C LCD Replacement: passo 3, immagine 1 di 1

    • The display is held in place by plastic tabs which slide over the outer edges of the backside of the display.

    • Gently work your way around the display while pulling the plastic tabs back to release the LCD display from the front panel.

    Traduci

  5. Pyle Astro PTBL7C LCD Replacement: passo 4, immagine 1 di 1

    • Once all clips are released gently open and separate the front plastic display from the LCD and place the LCD face down.

    • The front plastic display contains the external touch panel, and the capacitive touch screen overlay.

    Traduci

  6. Pyle Astro PTBL7C LCD Replacement: passo 5, immagine 1 di 1

    • Using both hands, gently release the ribbon cable to the capacitive touch screen overlay from the PCB board by pushing both gray tabs outwards.

    Traduci

  7. Pyle Astro PTBL7C LCD Replacement: passo 6, immagine 1 di 1
    Traduci

  8. Pyle Astro PTBL7C LCD Replacement: passo 7, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Plastic Cards
    $2.99
    Compra

    • Using a plastic card, gently remove the adhesive that holds the battery in place and separate the battery from the LCD panel.

    • Exercise extreme caution and be sure to not rupture the battery casing.

    Traduci

  9. Pyle Astro PTBL7C LCD Replacement: passo 8, immagine 1 di 1
    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Andrew Redifer

Membro da: 03/27/18

265 Reputazione

2 Guide realizzate

Distintivi: 4

+ 1 altro distintivo

Team

IUPUI, Team S3-G6, Harley Spring 2018 Membro di IUPUI, Team S3-G6, Harley Spring 2018

IUPUI-HARLEY-S18S3G6

3 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 278