Aggiusta la tua roba Comunità Store

Otium Bluetooth Headphones Battery Replacement

Introduzione

The Otium Bluetooth Headphones are rated for 500 charge cycles. If your headphones will not hold charge, or charge at all, you may need to replace the battery.

Cosa ti serve

    • Power off your earbuds first.

    • Use a pry tool to unclip the cover of the left earbud.

    Modifica

  2. Otium Bluetooth Headphones Battery Replacement: passo 2, immagine 1 di 2 Otium Bluetooth Headphones Battery Replacement: passo 2, immagine 2 di 2

    • Carefully remove the battery from the housing.

    • The battery is connected by two fragile wires.

    • Shown is a 3.7v 100mAh Lithium Polymer (LiPo) battery.

    Modifica

  4. Otium Bluetooth Headphones Battery Replacement: passo 3, immagine 1 di 2 Otium Bluetooth Headphones Battery Replacement: passo 3, immagine 2 di 2

    • Carefully peel back the rubber cover from the protection circuit module (PCM).

    • Remove the cover and save to re-use.

    • The rubber is attached using Kapton tape and hot glue.

    Modifica

  5. Otium Bluetooth Headphones Battery Replacement: passo 4, immagine 1 di 2 Otium Bluetooth Headphones Battery Replacement: passo 4, immagine 2 di 2

    • Carefully bend the PCM away from the battery to make desoldering the two wires easier.

    Modifica

    • Use a soldering iron to desolder the two wires from the PCM.

    • Adding a JST connector would make future repairs much easier!

    • Recycle your old battery!

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Geralt

Membro da: 11/28/14

1.961 Reputazione

2 Guide realizzate

Distintivi: 16

+13 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 41

Tutti i Tempi: 871