Salta al contenuto principale

Introduzione

Motherboard Replacement guide for Oral-B White Pro 1000 rechargeable electric toothbrush due to faulty operation. This guide illustrates the disassembly of the Oral-B White Pro 1000 electric toothbrush. Use caution not to short the positive (+) and negative (-) terminals when handling the battery. This guide also requires the use of a soldering tool which reaches high temperatures. Refer to this helpful guide for some great soldering and desoldering tips.

  1. Remove the brush head by pulling the top away from the base.
    • Remove the brush head by pulling the top away from the base.

  2. Pry open the end cap from the toothbrush body. Remove the spring. Remove the spring.
    • Pry open the end cap from the toothbrush body.

    • Remove the spring.

  3. Apply pressure on the brush shaft to release the toothbrush internals. Remove the internals through the bottom of the toothbrush body.
    • Apply pressure on the brush shaft to release the toothbrush internals.

    • Remove the internals through the bottom of the toothbrush body.

  4. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  5. Use flat head screwdriver to remove power button pressure plate. Use flat head screwdriver to remove power button pressure plate.
    • Use flat head screwdriver to remove power button pressure plate.

  6. Desolder the coil wire from the motherboard. Check out this helpful guide for some soldering and desoldering tips. Squeeze and remove coil from motherboard.
    • Desolder the coil wire from the motherboard.

    • Check out this helpful guide for some soldering and desoldering tips.

    • Squeeze and remove coil from motherboard.

  7. Desolder the motor from motherboard. Remove motherboard and battery from body of toothbrush internals.
    • Desolder the motor from motherboard.

    • Remove motherboard and battery from body of toothbrush internals.

  8. Desolder the battery connections from the motherboard. Remove motherboard from battery holder.
    • Desolder the battery connections from the motherboard.

    • Remove motherboard from battery holder.

Conclusione

Reattach new motherboard and reassemble your device following instructions in reverse order. Solder appropriate connections during reassembly.

Un'altra persona ha completato questa guida.

Hannah Parker

Membro da: 08/11/2017

146 Reputazione

1 Guida realizzata

Team

IUPUI, Team S5-G4, Baechle Fall 2017 Membro di IUPUI, Team S5-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G4

3 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 16

Tutti i Tempi: 396