Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Anti-Static Wrist Strap$7.95-
Set the tablet so the buttons, microSD, and stylus port are facing you.
-
Open the microSD slot.
-
Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
As you remove your case, be aware of small clips along the edges.
-
Finally, set the old casing aside.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Anti-Static Wrist Strap$7.95-
Carefully use the precision tweezers to unplug the ribbon cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 6.5 mm Phillips #00 screws and seven 3.0 mm Phillips #00 screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a pair of tweezers to disconnect the three black antenna cables from the motherboard.
-
Use the flat end of the spudger tool to carefully pry up the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the positive and negative battery cables from the motherboard.
-
The motherboard should now come free.
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.
9 Commenti
Where do you obtain a new motherboard?
The real question is more about how to find a new shield tablet motherboard ??
where can i buy the motherboard
waar kan ik een nieuw shield moederbord kopen?
Hello, I'm looking for a description of the various ribbon connectors on the motherboard.
I'm also looking for a hint to solve a problem I have after replacing the screen+digitizer: the right side (half) of the touch screen does'n work.