Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Use a pair of tweezers to disconnect the three black antenna cables from the motherboard. Use the flat end of the spudger tool to carefully pry up the motherboard. In the first Shield, the stylus ribbon cable is located under the right side of board. While there are 2 additional cables for the cameras underneath the left end of the board.  Be sure to loosen the cameras before lifting the board.
  • Use a pair of tweezers to disconnect the three black antenna cables from the motherboard.

  • Use the flat end of the spudger tool to carefully pry up the motherboard.

  • In the first Shield, the stylus ribbon cable is located under the right side of board. While there are 2 additional cables for the cameras underneath the left end of the board. Be sure to loosen the cameras before lifting the board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.