Aggiusta la tua roba ComunitĂ  Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nvidia Shield Battery Assembly Replacement

Introduzione

This will be a step-by-step guide to remove the battery assembly from the Nvidia Shield. This will need to be performed to install a new battery into the device. The user will not need any special skills beforehand to successfully remove the battery. The user can put the device back together with a new battery installed by following the steps in reverse. Replacing the battery in a Nvidia Shield can help improve the quality of the battery life of the product. If you notice the battery swelling or smoking, before proceeding check out the guide for what to do with a swollen battery.

Cosa ti serve

  1. Nvidia Shield Battery Assembly Replacement, Remove Front Panel: passo 1, immagine 1 di 3 Nvidia Shield Battery Assembly Replacement, Remove Front Panel: passo 1, immagine 2 di 3 Nvidia Shield Battery Assembly Replacement, Remove Front Panel: passo 1, immagine 3 di 3

    • Unscrew the 7 6.4mm T5 Torx screws from back panel

    • Use spudger to separate front and back panels

    Traduci

  2. Nvidia Shield Battery Assembly Replacement, Remove Green Grill: passo 2, immagine 1 di 2 Nvidia Shield Battery Assembly Replacement, Remove Green Grill: passo 2, immagine 2 di 2

    • The green grill is not screwed in so it can be pulled right out.

    Traduci

  4. Nvidia Shield Battery Assembly Replacement, Remove Battery Cables: passo 3, immagine 1 di 3 Nvidia Shield Battery Assembly Replacement, Remove Battery Cables: passo 3, immagine 2 di 3 Nvidia Shield Battery Assembly Replacement, Remove Battery Cables: passo 3, immagine 3 di 3

    • Remove the six 6.5mm T5 Torx screws.

    • Remove power wires.

    • Peel back copper tape and remove black and white wires.

    Traduci

  5. Nvidia Shield Battery Assembly Replacement, Remove Battery Apparatus: passo 4, immagine 1 di 1

    • Pull the battery apparatus out once all cables are removed.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Autore

con 8 altri collaboratori

Andrew Barbanera

Membro da: 09/20/14

376 Reputazione

2 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

USF Tampa, Team 1-1, Hickman Fall 2014 Membro di USF Tampa, Team 1-1, Hickman Fall 2014

USFT-HICKMAN-F14S1G1

4 Membri

18 Guide realizzate

4 Commenti

For replacement batteries, are they 18650? Do I want flat top or button tops?

evan - Replica

Hello,

any idea what connector the battery uses? I have a replacement pack but they put the cable on the wrong side of the pack (doesn’t fit backwards either)

Brett - Replica

The original cells are rated for 3.7v, 2450mAh, and I don't know how many amps but it's probably not that many. The form factor is flat-top 18650. I successfully did this repair using 3 Samsung 35E cells: https://www.18650batterystore.com/produc...

Charles Hall - Replica

So, is this battery pack compatible? I read it has the connector in the wrong side

andres.430 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 39

Tutti i Tempi: 6,015