Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nikon Coolpix L810 Motherboard Replacement

Introduzione

The motherboard is what makes the camera work. If your camera stops working, follow this guide to replace the motherboard.

Cosa ti serve

  1. Nikon Coolpix L810 Motherboard Replacement, LCD: passo 1, immagine 1 di 2 Nikon Coolpix L810 Motherboard Replacement, LCD: passo 1, immagine 2 di 2

    • Remove two 5 mm Phillips #000 screws on the right hand side of the camera located near the power button.

    • Use of precision tweezers to help remove loosened screws is suggested.

    Traduci

  2. Nikon Coolpix L810 Motherboard Replacement: passo 2, immagine 1 di 2 Nikon Coolpix L810 Motherboard Replacement: passo 2, immagine 2 di 2

    • Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component.

    Traduci

  3. Nikon Coolpix L810 Motherboard Replacement: passo 3, immagine 1 di 2 Nikon Coolpix L810 Motherboard Replacement: passo 3, immagine 2 di 2

    • Remove three 5 mm Phillips #000 screws on the bottom end of the camera.

    Traduci

  4. Nikon Coolpix L810 Motherboard Replacement: passo 4, immagine 1 di 1

    • Carefully detach the back side of the camera by lifting both ends, with moderate force wobble until loosened enough to remove.

    Traduci

  6. Nikon Coolpix L810 Motherboard Replacement: passo 5, immagine 1 di 2 Nikon Coolpix L810 Motherboard Replacement: passo 5, immagine 2 di 2

    • With the LCD screen facing towards you, flip the screen to the right.

    Traduci

  7. Nikon Coolpix L810 Motherboard Replacement: passo 6, immagine 1 di 3 Nikon Coolpix L810 Motherboard Replacement: passo 6, immagine 2 di 3 Nikon Coolpix L810 Motherboard Replacement: passo 6, immagine 3 di 3

    • Remove three 5 mm Phillips #000 screws located on the bracket.

    • Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed.

    Traduci

  8. Nikon Coolpix L810 Motherboard Replacement: passo 7, immagine 1 di 2 Nikon Coolpix L810 Motherboard Replacement: passo 7, immagine 2 di 2

    • Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers.

    Traduci

  9. Nikon Coolpix L810 Motherboard Replacement, Motherboard: passo 8, immagine 1 di 3 Nikon Coolpix L810 Motherboard Replacement, Motherboard: passo 8, immagine 2 di 3 Nikon Coolpix L810 Motherboard Replacement, Motherboard: passo 8, immagine 3 di 3

    • Remove three 5 mm Phillips #000 screws bordering the motherboard.

    Traduci

  10. Nikon Coolpix L810 Motherboard Replacement: passo 9, immagine 1 di 1

    • Remove the plastic component located directly behind the flash from its rubberized holder.

    Traduci

  11. Nikon Coolpix L810 Motherboard Replacement: passo 10, immagine 1 di 1

    • Remove the electric tape covering the wires.

    Traduci

  12. Nikon Coolpix L810 Motherboard Replacement: passo 11, immagine 1 di 3 Nikon Coolpix L810 Motherboard Replacement: passo 11, immagine 2 di 3 Nikon Coolpix L810 Motherboard Replacement: passo 11, immagine 3 di 3

    • Unsolder all the wires that are on the top of the motherboard near the flash component.

    Traduci

  13. Nikon Coolpix L810 Motherboard Replacement: passo 12, immagine 1 di 1

    • Unsolder the wires on the bottom end of the motherboard.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Emilio Mena

Membro da: 01/14/15

752 Reputazione

4 Guide realizzate

Distintivi: 15

+12 altri distintivi

Team

UW Tacoma, Team 3-1, Rose Winter 2015 Membro di UW Tacoma, Team 3-1, Rose Winter 2015

UWT-ROSE-W15S3G1

4 Membri

8 Guide realizzate

4 Commenti

The guide is incomplete! Do not try to remove the mobo for it is soldered to some other tiny board under the on/off switch. Trying to remove the mobo after just unscrewing it, may guide to certain and permanent destruction of both PCBs!!!

symeonleriou - Replica

any clue how to get tiny mobo out with mobo after taking screw out of tiny one at on/off switch?

jon baker - Replica

This guide should be for beginners, Mr. Symeon Leriou, and you will not only write "Mobo", but also motherboard or Mainboard or Hauptplatine (deutsch)

But I agree with you that it is not complete.

The motherboard is soldered to the on / off board (power supply for the batteries).

Soldering again is almost impossible ...

lothar4460 - Replica

Exactly! The guide is GOOD but it is incomplete!

The solder removal is insufficient to release de motherboard.

How to do it?

ramos.eng - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 23

Tutti i Tempi: 3,091