Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Remove Micro SD card and Battery
    • Remove Micro SD card and Battery

  2. Remove 2 screws Open plastic LCD connector cover Lift FPC connector latch
    • Remove 2 screws

    • Open plastic LCD connector cover

    • Lift FPC connector latch

    • Detach LCD FPC

  3. Remove 4 screws Remove LCD module Remove LCD module
    • Remove 4 screws

    • Remove LCD module

  4. WARNING!!! DO NOT TOUCH THESE Solder joints!!! High Voltage up to 300V..
    • WARNING!!! DO NOT TOUCH THESE Solder joints!!! High Voltage up to 300V..

    • Or discharge the flash condenser first, as per "Main PCB replace guide"

    • Remove 3 screws

  5. Left side, in connector bay, remove 2 screws. Bottom, reomve 2 screws Right side, remove 1 screw
    • Left side, in connector bay, remove 2 screws.

    • Bottom, reomve 2 screws

    • Right side, remove 1 screw

  6. Peel here and remove 1 screw within.
    • Peel here and remove 1 screw within.

  7. Pop open back case and remove it from body. Pop open back case and remove it from body.
    • Pop open back case and remove it from body.

  8. Disconnect speaker Disconnect keypad FPC Disconnect keypad FPC
    • Disconnect speaker

    • Disconnect keypad FPC

  9. Push latches from below
    • Push latches from below

    • pop up and remove keypad.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Terrance

Membro da: 17/11/2009

4.623 Reputazione

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 8