Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding the blaster, rotate the barrel assembly in the counter-clockwise direction and pull away from the blaster.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the stock of the blaster by pushing the orange tabs downward while pulling the stock away from the blaster.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the magazine from the blaster by forcing the sliding mechanism backwards, pushing the orange tabs downward, and pulling the magazine away.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the stock attachment point by removing the two 8mm Phillips head screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the eleven 8mm and two 10mm Phillips head screws from the left side of the blaster, and carefully remove the outer casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding down the white air chamber, pull the firing spring backwards to remove it from the blaster.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the white air chamber forward and remove the white alignment bracket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove white air chamber by depressing the orange trigger apparatus and pulling backwards off of the barrel.
-
Annulla: non ho completato questa guida.
Altre 16 persone hanno completato questa guida.
4 Commenti
Where did we found the pièces??
where i can buy for spare part “air chamber”?
this tutorial helped A LOT