Nerf N-Strike Elite Retaliator Case Disassembly

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Italiano

Traduzione in corso passo 5

Passo 5

Remove the eleven 8mm and two 10mm Phillips head screws from the left side of the blaster, and carefully remove the outer casing.
Two of the screws must be removed with the sliding mechanism in the forward position. Another two must be removed with the sliding mechanism in the back position.
There are several springs that may become displaced during this procedure. Proceed with the utmost caution.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.