/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi
Unisciti alla più grande community di riparazione al mondo
Ricambi
GuideRisposte
Modifica
NETGEAR WGT624 v3 Power Supply Replacement

NETGEAR WGT624 v3 Power Supply Replacement

Nicole Slagle

Nicole Slagle e 6 altri collaboratori

Ultimo aggiornamento il February 4, 2023

30 minuti
Moderato
Guida Studente in Evidenza

Introduzione

Vai al passo 1

This guide will instruct how to install the power supply.

Cosa ti serve

Strumenti

Mostra di più…

  1. NETGEAR WGT624 v3 Power Supply Replacement, Lower Case: passo 1, immagine 1 di 1

    • Turn the device so that the bottom is facing up.

    Modifica

  2. NETGEAR WGT624 v3 Power Supply Replacement: passo 2, immagine 1 di 3 NETGEAR WGT624 v3 Power Supply Replacement: passo 2, immagine 2 di 3 NETGEAR WGT624 v3 Power Supply Replacement: passo 2, immagine 3 di 3

    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

    Modifica

  3. NETGEAR WGT624 v3 Power Supply Replacement: passo 3, immagine 1 di 2 NETGEAR WGT624 v3 Power Supply Replacement: passo 3, immagine 2 di 2

    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

    Modifica

  4. NETGEAR WGT624 v3 Power Supply Replacement: passo 4, immagine 1 di 2 NETGEAR WGT624 v3 Power Supply Replacement: passo 4, immagine 2 di 2

    • Lift the lower case straight up from the rest of the router.

    Modifica

  5. NETGEAR WGT624 v3 Power Supply Replacement, Motherboard: passo 5, immagine 1 di 2 NETGEAR WGT624 v3 Power Supply Replacement, Motherboard: passo 5, immagine 2 di 2

    • Remove the clear plastic casing by lifting it straight up from the router.

    Modifica

  6. NETGEAR WGT624 v3 Power Supply Replacement: passo 6, immagine 1 di 2 NETGEAR WGT624 v3 Power Supply Replacement: passo 6, immagine 2 di 2

    • Separate the motherboard from the top shell by lifting it straight up from the router.

    Modifica

  8. NETGEAR WGT624 v3 Power Supply Replacement, Antenna: passo 7, immagine 1 di 1

    • Turn the motherboard, so that the top is facing upwards.

    • Place the motherboard on a clean flat surface.

    Modifica

  9. NETGEAR WGT624 v3 Power Supply Replacement: passo 8, immagine 1 di 2 NETGEAR WGT624 v3 Power Supply Replacement: passo 8, immagine 2 di 2

    • Remove the yellow tape that holds the wire.

    • Make sure that you set the tape aside on a clean surface, so that it can be reused.

    Modifica

  10. NETGEAR WGT624 v3 Power Supply Replacement: passo 9, immagine 1 di 3 NETGEAR WGT624 v3 Power Supply Replacement: passo 9, immagine 2 di 3 NETGEAR WGT624 v3 Power Supply Replacement: passo 9, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99

    • Use tweezers to gently pull the metal bracket that connects the antenna to the motherboard.

    • The wire should now be completely separate from the motherboard.

    Modifica

  11. NETGEAR WGT624 v3 Power Supply Replacement: passo 10, immagine 1 di 1

    • Extend the antenna away from the device, so that it becomes straight.

    Modifica

  12. NETGEAR WGT624 v3 Power Supply Replacement: passo 11, immagine 1 di 3 NETGEAR WGT624 v3 Power Supply Replacement: passo 11, immagine 2 di 3 NETGEAR WGT624 v3 Power Supply Replacement: passo 11, immagine 3 di 3

    • Find the clips that hold the antenna onto the router.

    • Use one hand to push the clips in, while using your other hand to pull out the antenna. You may need to gently twist the antenna so it can separate from the hole.

    • The antenna may take considerable force to remove.

    Modifica

  13. NETGEAR WGT624 v3 Power Supply Replacement: passo 12, immagine 1 di 1

    • Completely separate the antenna and wire from the rest of the device.

    Modifica

  14. NETGEAR WGT624 v3 Power Supply Replacement, Power Supply: passo 13, immagine 1 di 1

    • Unscrew the two 5 mm Phillips Head screws located at the front corners of the motherboard.

    Modifica

  15. NETGEAR WGT624 v3 Power Supply Replacement: passo 14, immagine 1 di 2 NETGEAR WGT624 v3 Power Supply Replacement: passo 14, immagine 2 di 2

    • Take off the metal frame.

    Modifica

  16. NETGEAR WGT624 v3 Power Supply Replacement: passo 15, immagine 1 di 1

    • Turn over the motherboard, so that the bottom is facing up.

    Modifica

  17. NETGEAR WGT624 v3 Power Supply Replacement: passo 16, immagine 1 di 2 NETGEAR WGT624 v3 Power Supply Replacement: passo 16, immagine 2 di 2

    • Do not refer to the pictures in this step for correct soldering and de-soldering techniques. They are solely for illustration purposes.

    • Desolder the three connections between the reset button and the motherboard

    • For proper soldering and desoldering techniques, refer here.

    • Pull the power source from the other side of the mother board once the solder is liquid.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 6 altri collaboratori

Nicole Slagle

Membro da: 01/25/13

83 Reputazione

2 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 3-31, Amido Winter 2013 Membro di Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 Membri

12 Guide realizzate

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 1,851