Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
See the speaker replacement guide and follow steps 1 and 2.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.
-
To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully lift the speaker out of its housing while leaving all wires connected.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the module out of the headphone cup, leaving all wires attached.
-
Clip the two wires circled in orange.
-
Now that the speaker is free set it aside.
-
Clip the two wires circled in yellow.
-
Replace speaker module and solder it to the two wires circled in orange.
-
Now solder the speaker wires (circled in yellow) back to the module.
-
For soldering see the ifixit soldering guide: Come saldare e dissaldare componenti elettrici
-