Salta al contenuto principale

Motorola syn1654A Speaker Module Replacement

Cosa ti serve

  1. Motorola syn1654A Speaker Module Replacement, Speaker Module: passo 1, immagine 1 di 2 Motorola syn1654A Speaker Module Replacement, Speaker Module: passo 1, immagine 2 di 2
    • See the speaker replacement guide and follow steps 1 and 2.

  2. Motorola syn1654A Speaker Module Replacement: passo 2, immagine 1 di 1
    • Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.

    • To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

  3. Motorola syn1654A Speaker Module Replacement: passo 3, immagine 1 di 1
    • Carefully lift the speaker out of its housing while leaving all wires connected.

  4. Motorola syn1654A Speaker Module Replacement: passo 4, immagine 1 di 1
    • Lift the module out of the headphone cup, leaving all wires attached.

    • Clip the two wires circled in orange.

    • Now that the speaker is free set it aside.

    • Clip the two wires circled in yellow.

    • Replace speaker module and solder it to the two wires circled in orange.

    • Now solder the speaker wires (circled in yellow) back to the module.

    • For soldering see the ifixit soldering guide: Come saldare e dissaldare componenti elettrici

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ben

Membro da: 02/24/14

104 Reputazione

1 Guida realizzata

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 240