Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola Moto Z2 Play Motherboard Replacement

Introduzione

The Motherboard of the Moto Z2 Play is a green-U-shaped board. The motherboard is the computer and it holds crucial components of the device. If the battery is known to be functioning, but the system remains completely dead, the motherboard may be broken. This guide details how to replace the motherboard of your Moto Z2 Play. To replace the motherboard, you need the following tools: a heat gun (or a hair dryer), a plastic opening tool, a suction cup, a plastic card, a tweezer, a sim card ejection tool, and a T3 torx screwdriver.

Cosa ti serve

  1. Motorola Moto Z2 Play Motherboard Replacement, Fingerprint Sensor Removal: passo 1, immagine 1 di 1

    • Apply an iOpener to the bottom edge of the display assembly for about a minute to loosen the adhesive beneath the fingerprint sensor.

    • A heat gun may also be used, but take care to not heat one area of the display assembly for too long, as this could damage the display.

    Traduci

  2. Motorola Moto Z2 Play Motherboard Replacement: passo 2, immagine 1 di 2 Motorola Moto Z2 Play Motherboard Replacement: passo 2, immagine 2 di 2

    • Carefully pry off the fingerprint sensor by lifting it with the edge of an opening pick.

    Traduci

  3. Motorola Moto Z2 Play Motherboard Replacement: passo 3, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Remove the fingerprint sensor with a pair of tweezers.

    • During reassembly, transfer the fingerprint sensor onto the new replacement display and press it into place.

    Traduci

  4. Motorola Moto Z2 Play Motherboard Replacement, Battery: passo 4, immagine 1 di 2 Motorola Moto Z2 Play Motherboard Replacement, Battery: passo 4, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Remove the orange tape, located at the bottom right of the phone, using tweezers.

    • Do not discard tape.

    Traduci

  5. Motorola Moto Z2 Play Motherboard Replacement: passo 5, immagine 1 di 2 Motorola Moto Z2 Play Motherboard Replacement: passo 5, immagine 2 di 2

    • Detach the red and black battery wire by lifting up with tweezers.

    Traduci

  6. Motorola Moto Z2 Play Motherboard Replacement: passo 6, immagine 1 di 2 Motorola Moto Z2 Play Motherboard Replacement: passo 6, immagine 2 di 2

    • Peel back the black tape that is located on the battery.

    • Make sure you pull back gently so you can reuse the tape with reassembly.

    Traduci

  7. Motorola Moto Z2 Play Motherboard Replacement: passo 7, immagine 1 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 7, immagine 2 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 7, immagine 3 di 3

    • Lift the black tape and slide a card under the battery.

    • Align the card parallel and under the battery.

    • Wedge the card further under the battery.

    • Lift the card up to assist in removing the battery from the adhesive.

    Traduci

  9. Motorola Moto Z2 Play Motherboard Replacement: passo 8, immagine 1 di 1

    • Lift to remove the battery from the device completely.

    Traduci

  10. Motorola Moto Z2 Play Motherboard Replacement, Speaker: passo 9, immagine 1 di 1

    • Remove the three silver 2.6 mm T3 Torx screws on the speaker shell at the top of the phone with a screwdriver by turning counterclockwise.

    • Remove the four black 3.5 mm T3 Torx screws on the speaker shell at the top of the phone with a screwdriver by turning counterclockwise.

    • It is helpful to keep screws on a magnetic surface to avoid losing them.

    Traduci

  11. Motorola Moto Z2 Play Motherboard Replacement: passo 10, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Lift up the silver metallic tape using the tweezers.

    Traduci

  12. Motorola Moto Z2 Play Motherboard Replacement: passo 11, immagine 1 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 11, immagine 2 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 11, immagine 3 di 3

    • Lift gently to completely remove speaker housing using tweezers.

    • Try lifting the speaker housing from both sides slightly before removing completely.

    Traduci

  13. Motorola Moto Z2 Play Motherboard Replacement: passo 12, immagine 1 di 2 Motorola Moto Z2 Play Motherboard Replacement: passo 12, immagine 2 di 2

    • Place the housing upside down in order to continue working.

    • Pry the speaker from the housing with a plastic opening tool.

    • When reassembling, make sure the metal connectors of speaker are in the bottom left and right corners (correct orientation).

    • Speaker clicks in on reassembly.

    Traduci

  14. Motorola Moto Z2 Play Motherboard Replacement, Audio Jack: passo 13, immagine 1 di 1

    • Remove the seven silver 2.6 mm T3 Torx screws on the black battery cable cover at the bottom of the phone with a screwdriver by turning counterclockwise.

    • Remove the single black 3.5 mm T3 Torx screw on the black battery cable cover at the bottom of the phone with a screwdriver by turning counterclockwise.

    • It is helpful to keep screws on a magnetic surface to avoid losing them.

    Traduci

  15. Motorola Moto Z2 Play Motherboard Replacement: passo 14, immagine 1 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 14, immagine 2 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 14, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Lift the battery cover with tweezers starting on the right side slightly to dislodge the cover.

    • Lift the battery cover with tweezers from the left side slightly to dislodge the cover.

    • Remove the battery cover with tweezers by solidly gripping the left side of the cover and lifting up.

    Traduci

  16. Motorola Moto Z2 Play Motherboard Replacement: passo 15, immagine 1 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 15, immagine 2 di 3 Motorola Moto Z2 Play Motherboard Replacement: passo 15, immagine 3 di 3

    • Tilt the front of the black audio jack up with tweezers.

    • Lift the audio jack out of its housing with tweezers.

    • Little force is required to remove the audio jack.

    Traduci

  17. Motorola Moto Z2 Play Motherboard Replacement, Motherboard: passo 16, immagine 1 di 2 Motorola Moto Z2 Play Motherboard Replacement, Motherboard: passo 16, immagine 2 di 2

    • Remove the three black 2.6 mm T3 Torx screws on the motherboard panel at the side of the phone with a screwdriver by turning counterclockwise.

    Traduci

  18. Motorola Moto Z2 Play Motherboard Replacement: passo 17, immagine 1 di 1

    • Place a plastic opening tool under the edge of the motherboard.

    Traduci

  19. Motorola Moto Z2 Play Motherboard Replacement: passo 18, immagine 1 di 1

    • Lift the motherboard from the right edge like a book towards the left.

    • Identify the connector on the top left of the device.

    Traduci

  20. Motorola Moto Z2 Play Motherboard Replacement: passo 19, immagine 1 di 2 Motorola Moto Z2 Play Motherboard Replacement: passo 19, immagine 2 di 2

    • Detach the connection on the bottom of the motherboard.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 7 altri collaboratori

mitch miller

Membro da: 01/24/18

2.055 Reputazione

8 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Cal Poly, Team S19-G5, Livingston Winter 2018 Membro di Cal Poly, Team S19-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S19G5

4 Membri

30 Guide realizzate

Un commento

Dear sir

I need Moto Z2 play mother board for golden colour hand set want to know the price

sudarsan kk Sudarsan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 25

Tutti i Tempi: 4,168