Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two rubber plugs on the top of the device by pushing them up and out of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 1cm Phillips #0 screws from the top and bottom of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to remove the keyboard cover by prying up on its perimeter.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the eight 4mm Phillips #00 screws from the keyboard cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
-
Pull the ribbon cable out of the socket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.
-
Remove the keyboard from the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the black rubber tabs up gently and remove them.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your finger, or spudger, push the motherboard out from the bottom.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three Phillips #00 screws from the motherboard:
-
Two 3mm screws.
-
One 1mm screw.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the speaker from the motherboard.
-