Introduzione
Use this guide to replace a defective earpiece speaker in your Motorola Moto C.
You’ll need replacement adhesive to reattach components when reassembling the device.
Cosa ti serve
-
-
Insert a thumbnail, or spudger, into the notch on the bottom right corner to start separating the phone unit from the back cover.
-
Move it to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.
-
-
-
Use a finger or spudger to lever the battery out of its recess and remove it.
-
-
-
-
Prepare an iOpener and apply it to the upper half of the display for at least two minutes to loosen the adhesive beneath the vibration motor and the rear facing camera.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.