Introduzione

To replace the screen of the Mio ALPHA 2, firstly you would need a proper repair toolkit. This is a relatively easy replacement as you would only need a Philip screwdriver with a PH0 head and tweezers. Be careful not to apply too much force or tug the cords inside.

This guide would be helpful if you're trying to replace the screen of your Mio ALPHA 2.

  1. Remove the four 6.7mm JIS #00 screws from the back cover.
    • Remove the four 6.7mm JIS #00 screws from the back cover.

    Aggiungi Commento

  2. Pull off the back cover of the watch
    • Pull off the back cover of the watch

    • Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from its socket.

    Aggiungi Commento

    • Remove the four 3.8mm JIS #00 screws from the motherboard.

    • Remove the motherboard with tweezers

    Aggiungi Commento

    • Remove the screen using tweezers.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Wong Jun Hua

Membro da: 21/05/2018

169 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G3, Harley Spring 2018 Membro di IUPUI, Team S1-G3, Harley Spring 2018

IUPUI-HARLEY-S18S1G3

6 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 13

Tutti i Tempi: 62