Introduzione

Before you start the replacement process, make sure that you have the proper repair tools, a Philips PH0 head and tweezers. You should be careful not to exert too much pressure/force on the components.

This guide will be able to walk you through the steps to replace your Mio ALPHA 2's motherboard.

  1. Remove the four 6.7mm JIS #00 screws from the back cover.
    • Remove the four 6.7mm JIS #00 screws from the back cover.

    Aggiungi Commento

  2. Pull off the back cover of the watch
    • Pull off the back cover of the watch

    • Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from its socket.

    Aggiungi Commento

    • Remove the four 3.8mm JIS #00 screws from the motherboard.

    • Remove the motherboard with tweezers

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Wong Jun Hua

Membro da: 21/05/2018

169 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G3, Harley Spring 2018 Membro di IUPUI, Team S1-G3, Harley Spring 2018

IUPUI-HARLEY-S18S1G3

6 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 52