Aggiusta le tue cose Community Store

Mi-T-M Heater MH-0190-0M10 Capacitor Replacement

Introduzione

Follow this guide to replace the capacitor on a Mi-T-M heater model MH-0190-0M10.

Cosa ti serve

  1. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Safety precautions: passo 1, immagine 1 di 2 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Safety precautions: passo 1, immagine 2 di 2

    • Power off the machine at least one hour prior to starting repairs. Ensure the machine is completely cool to the touch.

    • Flip the power switch into the OFF position.

    • Unplug any extension cords from the included power cord.

    Modifica

  2. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Remove the upper shell: passo 2, immagine 1 di 2 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Remove the upper shell: passo 2, immagine 2 di 2

    • Use a 5/16 inch socket or Phillips screwdriver to remove the eight screws securing the upper shell, four on each side.

    Modifica

  4. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: passo 3, immagine 1 di 2 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: passo 3, immagine 2 di 2

    • Lift the upper shell straight up off of the machine to remove it.

    Modifica

  5. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Disconnect the capacitor: passo 4, immagine 1 di 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Disconnect the capacitor: passo 4, immagine 2 di 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Disconnect the capacitor: passo 4, immagine 3 di 3

    • Grip the black and white wires by their connectors and pull firmly to remove them from the capacitor.

    • During reassembly, install the white and black wires on the same terminals as they were installed on the original capacitor.

    Modifica

  6. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement, Remove the capacitor: passo 5, immagine 1 di 1

    • Use a Phillips screwdriver to remove the screw securing the capacitor band clamp.

    Modifica

  7. Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: passo 6, immagine 1 di 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: passo 6, immagine 2 di 3 Mi-T-M Heater MH-0190-0M10 Capacitor Replacement: passo 6, immagine 3 di 3

    • Remove the capacitor.

    • During reassembly, align the foam padding between the capacitor and the band clamp.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Sam Omiotek

Membro da: 02/25/19

84.357 Reputazione

290 Guide realizzate

Distintivi: 35

+32 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 71