Salta al contenuto principale

Master and Dynamic MW50 Charging Port Replacement

Cosa ti serve

  1. Master and Dynamic MW50 Charging Port Replacement, Master and Dynamic MW50 Disassembly: passo 1, immagine 1 di 3 Master and Dynamic MW50 Charging Port Replacement, Master and Dynamic MW50 Disassembly: passo 1, immagine 2 di 3 Master and Dynamic MW50 Charging Port Replacement, Master and Dynamic MW50 Disassembly: passo 1, immagine 3 di 3
    • Pull the cushion off of the desired side by gripping the top of the headphones and pulling the cushion off.

  2. Master and Dynamic MW50 Charging Port Replacement: passo 2, immagine 1 di 1
    • Remove the four 5mm screws from the earpiece with a Y1 Triwing screwdriver.

  3. Master and Dynamic MW50 Charging Port Replacement: passo 3, immagine 1 di 1
    • Use the Jimmy to lift up the black cover to get inside the device.

  4. Master and Dynamic MW50 Charging Port Replacement, Charging Port: passo 4, immagine 1 di 2 Master and Dynamic MW50 Charging Port Replacement, Charging Port: passo 4, immagine 2 di 2
    • Remove the two 2mm screws pictured with a JIS #00 screwdriver.

    • Gently pull the silver cover off of the ear piece.

  5. Master and Dynamic MW50 Charging Port Replacement: passo 5, immagine 1 di 1
    • Remove the two 2mm screws shown with a JIS #00 screwdriver.

  6. Master and Dynamic MW50 Charging Port Replacement: passo 6, immagine 1 di 1
    • Lift up the mother board with the attached charging port to see the soldering points. You must desolder these points in order to detach (and re-attach) the charging port.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tyler Guffey

Membro da: 01/24/19

208 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S1-G4, White Winter 2019 Membro di Cal Poly, Team S1-G4, White Winter 2019

CPSU-WHITE-W19S1G4

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 297