Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

Follow this guide to replace the deflector knob on a Little Wonder GX270 Maximum Output Blower.

Strumenti

Nessun attrezzo specificato.

  1. Before you begin, ensure that the engine is off and cool to the touch. Before you begin, ensure that the engine is off and cool to the touch.
    • Before you begin, ensure that the engine is off and cool to the touch.

  2. Locate the gas cutoff valve and flip the switch to the left to shut it. Locate the gas cutoff valve and flip the switch to the left to shut it.
    • Locate the gas cutoff valve and flip the switch to the left to shut it.

  3. Grab the plastic housing at the end of the spark plug wire. Pull firmly to disconnect the wire from the spark plug.
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  4. Turn the deflector knob counterclockwise to unscrew and remove it.
    • Turn the deflector knob counterclockwise to unscrew and remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sam Omiotek

Membro da: 25/02/2019

6.192 Reputazione

46 Guide realizzate

Team

iFixit Membro di iFixit

Community

132 Membri

13.004 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 12

Tutti i Tempi: 54