Cosa ti serve
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove void warranty sticker
-
The sticker is covering a torx screw
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long.
-
Push level, this will detach the back of the guitar from the front.
-
Carefully remove the back of the body
-
The battery pack cord is attached to both sides of the guitar, be careful not to tear it apart.
-
The neck connector may be stuck to the back so be sure to detach it before fully pulling
-
