Salta al contenuto principale

Lenovo Y50-70 Touch Heat Sink Replacement

Cosa ti serve

  1. Lenovo Y50-70 Touch Heat Sink Replacement, Heat Sink: passo 1, immagine 1 di 2 Lenovo Y50-70 Touch Heat Sink Replacement, Heat Sink: passo 1, immagine 2 di 2
    • Remove all twelve 6 mm long screws on the back of the laptop with a Phillips #1 screwdriver.

    • Apply a lot of pressure to prevent the screws from stripping.

    • Make sure to turn off the computer first!

  2. Lenovo Y50-70 Touch Heat Sink Replacement: passo 2, immagine 1 di 2 Lenovo Y50-70 Touch Heat Sink Replacement: passo 2, immagine 2 di 2
    • Pull off the back cover of the laptop. It should come off easily.

  3. Lenovo Y50-70 Touch Heat Sink Replacement: passo 3, immagine 1 di 2 Lenovo Y50-70 Touch Heat Sink Replacement: passo 3, immagine 2 di 2
    • Remove all six 7mm screws from the heat sink using the Phillips #1 screwdriver.

  4. Lenovo Y50-70 Touch Heat Sink Replacement: passo 4, immagine 1 di 2 Lenovo Y50-70 Touch Heat Sink Replacement: passo 4, immagine 2 di 2
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Kevin Silken

Membro da: 01/21/15

418 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 18-1, Maness Winter 2015 Membro di Cal Poly, Team 18-1, Maness Winter 2015

CPSU-MANESS-W15S18G1

5 Membri

15 Guide realizzate

Un commento

Hope someone see this cmt. I cannot lift up the heat sink for some reason. All 6 screws are removed. Any advice?

Dalala - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 12

Tutti i Tempi: 6,459