Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

If your Lenovo ThinkPad X1 Gen 1 Extreme (model number 20MF-000LUS) is having trouble connecting to WiFi or Bluetooth, use this guide to replace the wireless adapter.

Before replacing the wireless adapter, refer to the troubleshooting page for the Lenovo ThinkPad Gen 1 Extreme to see if the problem is fixable without purchasing and installing another wireless adapter.

Please be sure to disconnect the computer from any power and turn the computer completely off. It is also important to be careful when removing the wireless adapter; any damage can make the computer not work.

  1. Orient the laptop so that it is bottom up, and the track pad is closet to you. Unscrew the seven cover screws with a Phillips #00 head screwdriver. These screws will loosen but will stay attached to the cover.
    • Orient the laptop so that it is bottom up, and the track pad is closet to you.

    • Unscrew the seven cover screws with a Phillips #00 head screwdriver. These screws will loosen but will stay attached to the cover.

    • Slide the blue opening pick along the side of the laptop and pry off the one clip on each side.

  2. Kit cacciaviti Manta

    112 punte per ogni riparazione.

    Upgrade Your Toolbox

    Kit cacciaviti Manta

    Upgrade Your Toolbox
  3. Using a Phillips #00 head screwdriver, remove the 3mm screw holding the wireless adapter to the motherboard. Using a Phillips #00 head screwdriver, remove the 3mm screw holding the wireless adapter to the motherboard.
    • Using a Phillips #00 head screwdriver, remove the 3mm screw holding the wireless adapter to the motherboard.

  4. Slide the chip to the right carefully until the wireless adapter pops out. Disconnect the grey and black wires by lifting them off straight up until they pop off the wireless adapter. The chip should be completely removed from the computer and you are done.
    • Slide the chip to the right carefully until the wireless adapter pops out.

    • Disconnect the grey and black wires by lifting them off straight up until they pop off the wireless adapter.

    • The chip should be completely removed from the computer and you are done.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team S7-G3, Regan Winter 2020 Membro di Cal Poly, Team S7-G3, Regan Winter 2020

CPSU-REGAN-W20S7G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 19

Tutti i Tempi: 59