Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

If the phone is having internet issues or memory problems, replacing the SIM/SD Port could resolve these problems.

Parti

Nessuna parte specificata.

  1. Using your thumbnail, lift up on the notch in the middle of the bottom side of the phone. Using your thumbnail, lift up on the notch in the middle of the bottom side of the phone.
    • Using your thumbnail, lift up on the notch in the middle of the bottom side of the phone.

  2. Using either your thumbnail or a plastic opening tool, lift up on the battery using the notch in the bottom left hand corner of the battery and remove it from the phone.
    • Using either your thumbnail or a plastic opening tool, lift up on the battery using the notch in the bottom left hand corner of the battery and remove it from the phone.

  3. Remove eleven 4mm Phillips #000 screws with a PH000 screwdriver. Use the magnetic mat to keep the screws in one place.
    • Remove eleven 4mm Phillips #000 screws with a PH000 screwdriver.

    • Use the magnetic mat to keep the screws in one place.

  4. Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kit per Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  5. Use the plastic opening tool to firmly pry up the plastic backing around the perimeter of the phone.
    • Use the plastic opening tool to firmly pry up the plastic backing around the perimeter of the phone.

  6. Detach the black rectangular film attached to the SIM/SD card plate with a plastic opening tool.
    • Detach the black rectangular film attached to the SIM/SD card plate with a plastic opening tool.

  7. Hook the plastic opening tool underneath the plate and gently lift it up.
    • Hook the plastic opening tool underneath the plate and gently lift it up.

  8. Gently wiggle the plate side-to-side while pulling up to release it from the metal clamps holding it in.
    • Gently wiggle the plate side-to-side while pulling up to release it from the metal clamps holding it in.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aiman Sallam

Membro da: 10/02/2016

506 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 1-4, Sullivan Spring 2016 Membro di USF Tampa, Team 1-4, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G4

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 119