Introduzione
Replacing the speaker requires soldering and extensive disassembly. Refer to iFixit's soldering guide if you have never used a soldering iron or if you need a refresher.
Cosa ti serve
-
-
On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.
-
-
Attrezzo utilizzato in questo passaggio:Tweezers$4.99
-
Remove the two screw covers at the top of phone with tweezers.
-
-
-
-
Use the plastic opening tool to gently lift the snapped-in motherboard from the front panel.
-
-
-
Take the front case and unscrew the four Phillips #000 (1mm) screws around the ribbon.
-
-
-
Gently pry the LCD ribbon from the left side of the front cover using the plastic opening tool.
-
-
-
Use a soldering iron to desolder the lead junctions. If you have never used a soldering iron or you need a refresher, check out iFixit's soldering guide.
-
Separate the speaker from the LCD screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.