Aggiusta la tua roba Comunità Store

Kyocera Hydro Life Charging Port Replacement

Introduzione

This is a replacement guide for the charging port of the Kyocera Hydro Life. This guide requires specialized soldering knowledge and tools. Please ensure that you have these tools before attempting this guide.

Cosa ti serve

  1. Kyocera Hydro Life Charging Port Replacement, Charging Port: passo 1, immagine 1 di 2 Kyocera Hydro Life Charging Port Replacement, Charging Port: passo 1, immagine 2 di 2

    • Remove the back of the phone.

    Modifica

  2. Kyocera Hydro Life Charging Port Replacement: passo 2, immagine 1 di 3 Kyocera Hydro Life Charging Port Replacement: passo 2, immagine 2 di 3 Kyocera Hydro Life Charging Port Replacement: passo 2, immagine 3 di 3

    • Remove the battery by pulling up on the end and towards yourself.

    Modifica

  3. Kyocera Hydro Life Charging Port Replacement: passo 3, immagine 1 di 1

    • Use a PH0 screwdriver to remove the 6 screws which are holding the panel in the phone.

    Modifica

  4. Kyocera Hydro Life Charging Port Replacement: passo 4, immagine 1 di 3 Kyocera Hydro Life Charging Port Replacement: passo 4, immagine 2 di 3 Kyocera Hydro Life Charging Port Replacement: passo 4, immagine 3 di 3

    • Remove the frame from around the back of the phone.

    • Then remove the back panel of the phone.

    • Remove the white sticker from in the middle of the phone.

    Modifica

  6. Kyocera Hydro Life Charging Port Replacement: passo 5, immagine 1 di 3 Kyocera Hydro Life Charging Port Replacement: passo 5, immagine 2 di 3 Kyocera Hydro Life Charging Port Replacement: passo 5, immagine 3 di 3

    • Desolder the 7 pins.

    • If you have never soldered before, follow this guide.

    • This type of soldering requires very specialized and expensive equipment. Please be careful if you decide to continue following this guide.

    Modifica

  7. Kyocera Hydro Life Charging Port Replacement: passo 6, immagine 1 di 2 Kyocera Hydro Life Charging Port Replacement: passo 6, immagine 2 di 2

    • Desolder the positive and negative terminals.

    Modifica

  8. Kyocera Hydro Life Charging Port Replacement: passo 7, immagine 1 di 1

    • Peel back the copper plated sticker.

    • If the copper plated sticker is broken, it must be replaced. If it is not broken during disassembly, it can be reused.

    Modifica

  9. Kyocera Hydro Life Charging Port Replacement: passo 8, immagine 1 di 1

    • Remove the motherboard without breaking it by placing it to the side. It will still be attached to the phone.

    Modifica

  10. Kyocera Hydro Life Charging Port Replacement: passo 9, immagine 1 di 1

    • Using force, remove the charging port from the charging slot.

    Modifica

  11. Kyocera Hydro Life Charging Port Replacement: passo 10, immagine 1 di 1

    • Replace the charging port and ribbon.

    • If the copper-plated sticker is damaged, it will need to be replaced as well.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 9

Tutti i Tempi: 990