Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Kodak Easyshare C813 LCD Replacement

Introduzione

This guide demonstrates how to install a LCD.

Cosa ti serve

  1. Kodak Easyshare C813 LCD Replacement, Battery: passo 1, immagine 1 di 1

    • Turn off camera by firmly pressing the power button that is located on the top of the camera near the selector dial.

    Traduci

  2. Kodak Easyshare C813 LCD Replacement: passo 2, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 2, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 2, immagine 3 di 3

    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

    Traduci

  3. Kodak Easyshare C813 LCD Replacement, Back Cover: passo 3, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Anti-Static Wrist Strap
    $7.95
    Compra
    Traduci

  4. Kodak Easyshare C813 LCD Replacement: passo 4, immagine 1 di 1

    • Turn the camera off by firmly pressing the power button located on top of the camera.

    Traduci

  5. Kodak Easyshare C813 LCD Replacement: passo 5, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 5, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 5, immagine 3 di 3

    • Locate the 7 screws holding the back cover on.

    • Three screws are located on the bottom of the camera.

    • Two screws are located on the side shown in the photograph.

    • Two final screws are located on the opposite side shown in the photograph.

    Traduci

  6. Kodak Easyshare C813 LCD Replacement: passo 6, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 6, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 6, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Phillips #00 Screwdriver
    $5.49
    Compra

    • Remove all 7 screws:

    • Hold the camera firmly with one hand so that you can still see a screw.

    • Place the Philips 00(Found here)screwdriver into the screw.

    • Turn the screwdriver to the left until it is free.

    • Repeat for the remaining screws.

    Traduci

  8. Kodak Easyshare C813 LCD Replacement: passo 7, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 7, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 7, immagine 3 di 3

    • Use plastic opening tools to slightly open the side of the case.

    • Insert a plastic opening tool and apply pressure to the internal three tabs at the top.

    • The first two are near the words "3X Optical Zoom".

    • The third is near the shutter button.

    Traduci

  9. Kodak Easyshare C813 LCD Replacement: passo 8, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 8, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 8, immagine 3 di 3

    • Gently pull apart the back cover from the rest of the camera.

    • Make sure there are no more screws or tabs keeping the cover on.

    • Use the plastic opening tool to separate any sides still closely connected.

    Traduci

  10. Kodak Easyshare C813 LCD Replacement, Front Cover: passo 9, immagine 1 di 2 Kodak Easyshare C813 LCD Replacement, Front Cover: passo 9, immagine 2 di 2

    • Open the battery door.

    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

    Traduci

  11. Kodak Easyshare C813 LCD Replacement: passo 10, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 10, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 10, immagine 3 di 3

    • Use the plastic opening tool to lift the casing around the shutter button.

    • Gently remove the front cover from the device.

    Traduci

  12. Kodak Easyshare C813 LCD Replacement: passo 11, immagine 1 di 1

    • Do not touch the terminals shown in the photo. These link to the capacitor which could shock you if not discharged.

    • To discharge the capacitor follow this guide.

    Traduci

  13. Kodak Easyshare C813 LCD Replacement, LCD: passo 12, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement, LCD: passo 12, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement, LCD: passo 12, immagine 3 di 3

    • Once the front cover is removed, the battery door maybe closed for convenience.

    • Locate the exposed portion of the LCD screen.

    • Use a wedge to free the LCD screen from the medal housing.

    • Do not pull the screen away completely, it is still attached to the logic board via the yellow cable.

    Traduci

  14. Kodak Easyshare C813 LCD Replacement: passo 13, immagine 1 di 1

    • Remove the screw at the upper right corner of the metal housing.

    Traduci

  15. Kodak Easyshare C813 LCD Replacement: passo 14, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 14, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 14, immagine 3 di 3

    • Locate the 2 solder joints holding down the medal housing.

    • Remove the solder.

    • Place wick on solder.

    • Place solder iron on wick

    • The wick should be sandwiched between the iron and the solder.

    Traduci

  16. Kodak Easyshare C813 LCD Replacement: passo 15, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 15, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 15, immagine 3 di 3

    • Peel back the black tape from the metal housing.

    • Lift the metal housing from the left so that it hinges on its right side.

    • The metal housing is still loosely attached on its right side.

    Traduci

  17. Kodak Easyshare C813 LCD Replacement: passo 16, immagine 1 di 3 Kodak Easyshare C813 LCD Replacement: passo 16, immagine 2 di 3 Kodak Easyshare C813 LCD Replacement: passo 16, immagine 3 di 3

    • Locate black tab holding the LCD screen connector in the port.

    • Use wedge or fingernail to lift the black tab.

    • Pull the the LCD screen connector out of the port.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 6 altri collaboratori

Samantha Murray

Membro da: 04/15/10

269 Reputazione

3 Guide realizzate

Distintivi: 15

+12 altri distintivi

Team

Cal Poly, Team 24-22, Regan Spring 2010 Membro di Cal Poly, Team 24-22, Regan Spring 2010

CPSU-REGAN-S10S24G22

4 Membri

20 Guide realizzate

Un commento

De sluiterknop werkt niet altijd, hoe is dit op te lossen?

Jacobus Rijken - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 31

Tutti i Tempi: 13,106