Kocaso M750B Speaker Replacement

Introduzione

This is an in-depth guide on how to replace the speaker in the Kocaso M750B tablet. This guide promises valuable insights into the process of speaker replacement. We'll explore the reasons behind considering such an upgrade, the benefits it can bring to your overall tablet experience, and the step-by-step guide to successfully replace the speakers in your Kocaso M750B. These instructions also include soldering and desoldering connections. For safety guidelines on how to solder, visit this page for more information.

Cosa ti serve

Passo 1 Backplate

Kocaso M750B Speaker Replacement, Backplate: passo 1, immagine 1 di 3

Kocaso M750B Speaker Replacement, Backplate: passo 1, immagine 2 di 3

Kocaso M750B Speaker Replacement, Backplate: passo 1, immagine 3 di 3

Pry the edges of the tablet apart using an iFixit opening tool.

Modifica

Passo 2 Speaker

Kocaso M750B Speaker Replacement, Speaker: passo 2, immagine 1 di 2

Kocaso M750B Speaker Replacement, Speaker: passo 2, immagine 2 di 2

Insert a spudger into the mesh that holds the speaker.
Press around the mesh lightly until the speaker comes loose.

Modifica

Passo 3

Desolder the solder joints that connect the motherboard to the speaker.
The solder joints are connected to one red and one black cable.
When using the soldering iron, make sure to review the safety guidelines provided in the introduction. Work carefully and precisely to avoid any electrical discharge, puncture of the battery, or heating of the motherboard.