Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the lid by turning it counter-clockwise and lifting up.
-
Remove the inner pot.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the Instant Pot upside down.
-
Remove the single 12-mm screw by using the T-15 head screwdriver and turning it counter-clockwise.
-
Turn the plate counter-clockwise and lift it off the Instant Pot.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three 19-mm screws in the black plastic base's edge using the PH-1 head screwdriver and twisting counter-clockwise.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the power cord out of its slot.
-
Pull up on the edge of the black plastic base to remove the base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the two green-striped yellow wires that are connected onto the bottom of the heating element. Use a PH-1 head screwdriver and turn counter-clockwise to remove the 10-mm screw holding them in place.
-
Pull up on the cn101 connection to detach the LED display from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the silver outer shell off of the top black ring.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 10-mm screws connecting the LED display to the outer shell using a PH-1 head screwdriver and twisting counter clockwise.
-
Pull out the LED display by pulling on it gently.
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.
2 Commenti
Where can I get the replacement for the display?