Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Disconnect the two green-striped yellow wires that are connected onto the bottom of the heating element.  Use a PH-1 head screwdriver and turn counter-clockwise to remove the 10-mm screw holding them in place. Be careful not to lose the small washer that comes with this screw. Pull up on the cn101 connection to detach the LED display from the motherboard.
  • Disconnect the two green-striped yellow wires that are connected onto the bottom of the heating element. Use a PH-1 head screwdriver and turn counter-clockwise to remove the 10-mm screw holding them in place.

  • Be careful not to lose the small washer that comes with this screw.

  • Pull up on the cn101 connection to detach the LED display from the motherboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.