Salta al contenuto principale

Insignia Flex 8 Battery Replacement

Cosa ti serve

  1. Insignia Flex 8 Battery Replacement, Battery: passo 1, immagine 1 di 1
    • Make sure the power is off to avoid injury in the following steps.

    • Position the tablet so that the screen is face down.

    • The power button is located in the upper left hand corner.

    • Hold the power button for three seconds until the tablet powers down.

  2. Insignia Flex 8 Battery Replacement: passo 2, immagine 1 di 2 Insignia Flex 8 Battery Replacement: passo 2, immagine 2 di 2
    • Remove the back casing by sliding a credit card or a similarly thin but firm object in between the casing and the screen.

    • Run this object around the perimeter of the tablet until there is separation between the casing and the screen.

    • Remove the back casing and set aside.

  3. Insignia Flex 8 Battery Replacement: passo 3, immagine 1 di 1
    • Peel back the tape from battery and case.

  4. Insignia Flex 8 Battery Replacement: passo 4, immagine 1 di 1
    • Slide the spudger beneath battery to pry away it away from the case. Work around the battery, prying up all edges to remove from glue.

    • Do not puncture or bend battery. This could cause battery to leak acid.

  5. Insignia Flex 8 Battery Replacement: passo 5, immagine 1 di 1
    • Desolder the black, yellow and red connections from circuit board. Desoldering Help

    • Keep the soldering tool away from other components on the circuit board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 9,091