Huawei Y300 Charging Port Replacement

Introduzione

In this guide we are going to replace the charging report on the Huawei ascend Y300 android smartphone. Before starting, it is a good idea to prepare an organized area to carry out the repair. It is also helpful to have a way of containing loose screws so they do not become lost. In addition, his guide requires soldering, a “How To” guide is included.

Cosa ti serve

Passo 1 Charging Port

Huawei Y300 Charging Port Replacement, Charging Port: passo 1, immagine 1 di 2

Huawei Y300 Charging Port Replacement, Charging Port: passo 1, immagine 2 di 2

Remove the back plate by hand. There is a small indent on the bottom of the phone to pry open.

Modifica

Passo 2

Lift up and remove the battery.

Modifica

Passo 3

Use a T4 Torx screwdriver to remove the 8 screws along the outer edge of the case.

Modifica

Passo 4

Using the plastic opening tool, pry the screen from the casing. Insert the tool between the case and screen to pry the pieces apart.
Take care to not damage the screen or case.

Modifica

Passo 5

Use a soldering iron to desolder the four connections to the charging port.
For information regarding how to properly solder, click the following link. Come saldare e dissaldare componenti elettrici.