Aggiusta la tua roba Comunità Store

Hover-1 Eagle Throttle/Brake Lever Replacement

Introduzione

This guide will walk you through how to replace a faulty or non-functional throttle or brake lever on a Hover-1 Eagle scooter. You should replace your throttle or brake lever if your lever fails to accelerate or stop the scooter or appears damaged. To determine if you need to replace your throttle or brake lever, refer to our Troubleshooting Guide.

Cosa ti serve

  1. Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: passo 1, immagine 1 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: passo 1, immagine 2 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: passo 1, immagine 3 di 3

    • Unscrew the scooter handle.

    • The scooter handles are left-handed or reverse threaded, so twist clockwise to remove them.

    Traduci

  2. Hover-1 Eagle Throttle/Brake Lever Replacement: passo 2, immagine 1 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 2, immagine 2 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 2, immagine 3 di 3

    • Push back the fastening clips by wedging the plastic spudger between the clip and the throttle handle.

    • Insert iFixit opening picks between each fastening clip and the throttle handle to prevent re-fastening.

    • Pull the throttle lever off gently by pulling towards you.

    • The spring housed in the handle can sometimes send the lever flying. Maintain a firm grip on the throttle lever.

    Traduci

  4. Hover-1 Eagle Throttle/Brake Lever Replacement: passo 3, immagine 1 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 3, immagine 2 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 3, immagine 3 di 3

    • To reassemble, insert the spring into the placement hole, housed inside the throttle handle. Insert the other end of the spring into the placement hole inside the throttle body housing.

    Traduci

  5. Hover-1 Eagle Throttle/Brake Lever Replacement: passo 4, immagine 1 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 4, immagine 2 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 4, immagine 3 di 3

    • Twist the throttle lever back to its original orientation by rotating it to the left.

    • Apply pressure to the throttle handle until you hear the fastening clips take hold the of the throttle lever.

    • Make sure the throttle lever is fully inserted and flush with the display throttle body.

    Traduci

  6. Hover-1 Eagle Throttle/Brake Lever Replacement: passo 5, immagine 1 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 5, immagine 2 di 3 Hover-1 Eagle Throttle/Brake Lever Replacement: passo 5, immagine 3 di 3

    • Reattach the scooter handle.

    • Make sure to twist the handles counterclockwise to tighten.

    Traduci
Linea Traguardo

Altre 4 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Andrew Gaskell

Membro da: 01/23/20

1.008 Reputazione

5 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team S1-G2, White Winter 2020 Membro di Cal Poly, Team S1-G2, White Winter 2020

CPSU-WHITE-W20S1G2

4 Membri

6 Guide realizzate

24 Commenti

Great detail……….. Where can I buy the replacement part (throttle) the company hover1 isn't answering me and they don't have this part on their website. Thanks

hanjna76 - Replica

Im needed a throttle did anyone have any luck?

rodarte_amanda1992 -

Where do I buy the part where do I get it please let me know The brake lever

poorbubbaa - Replica

Necesito acelerador y no lo encuentro.

Josue Villanueva - Replica

I cant squeeze the spudger and the pick between this and the spudger broke…what the!!!

Cheri Rael - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 82

Tutti i Tempi: 15,394