Introduzione
This guide will walk you through how to replace a faulty or wobbly kickstand on a Hover-1 Eagle scooter. You should replace your kickstand if your kickstand is defective, wobbly, or not the proper length. To determine if you need to replace your kickstand, refer to our Troubleshooting Guide.
Cosa ti serve
-
-
Remove the two 6mm axle screws using a hex bit 4.0.
-
Remove the kickstand from the scooter.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
Team
Cal Poly, Team S1-G2, White Winter 2020 Membro di Cal Poly, Team S1-G2, White Winter 2020
CPSU-WHITE-W20S1G2
4 Membri
6 Guide realizzate
