Introduzione
Repair or replace your Holmes HEH8031 heater circuit board.
Cosa ti serve
-
-
-
Desolder the BLACK wires from the "AC-L" point and "T/S" point.
-
Desolder the WHITE wire from the "AC-N" point.
-
Desolder the RED wire from the "FAN-RED".
-
Desolder the GREY wire from the "24V" point.
-
Desolder the BROWN wires from "HEAT1," and "HEAT2" points.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.