Salta al contenuto principale

Hipstreet Equinox 2 Speaker Replacement

Cosa ti serve

  1. Hipstreet Equinox 2 Speaker Replacement, Rear Case: passo 1, immagine 1 di 1
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Speaker Replacement: passo 2, immagine 1 di 1
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Speaker Replacement, Speaker: passo 3, immagine 1 di 1
    • Use a plastic opening tool to remove the speakers from the case.

    • Desolder the wires from the motherboard.

    • Be sure to note which wire, red or black, corresponds to which connection on the motherboard.

  4. Hipstreet Equinox 2 Speaker Replacement: passo 4, immagine 1 di 1
    • Solder the wires of the new speaker to the motherboard as shown in the image.

  5. Hipstreet Equinox 2 Speaker Replacement: passo 5, immagine 1 di 1
    • Glue the speakers flat against their respective sound output panels with the silver sides facing out/towards the interior of the tablet.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Joel Miller

Membro da: 01/29/15

119 Reputazione

1 Guida realizzata

Team

Clemson, Team 15-8, Shirley Winter 2015 Membro di Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

5 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 199