Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
If your front camera isn't working as needed, just replace it! This guide will teach you how.
Cosa ti serve
-
-
Fill a pot or pan with enough water to fully submerge an iOpener.
-
Heat the water to a boil. Turn off the heat.
-
Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.
-
Use tongs to extract the heated iOpener from the hot water.
-
Thoroughly dry the iOpener with a towel.
-
Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.
-
-
-
Handling it by the tag, place the heated iOpener across the bottom casing.
-
-
-
-
Using the pointed end of a spudger, lift the battery cable and release the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.