Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the thirteen 5mm Phillips #0 screws from the bottom case.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the laptop over and open it up.
-
Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.
-
Lift up the keyboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.
-
Pull up the ribbon cables from their sockets.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.