Salta al contenuto principale

HP Star Wars Special Edition 15-an051dx Screen Replacement

Cosa ti serve

  1. HP Star Wars Special Edition 15-an051dx Screen Replacement, Screen: passo 1, immagine 1 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement, Screen: passo 1, immagine 2 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement, Screen: passo 1, immagine 3 di 3
    • Make sure the laptop is fully powered down and unplugged before you start.

    • Remove the two circular plastic screw covers, then remove the two 4.5 mm screws in the using a Phillips #1 screwdriver.

  2. HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 2, immagine 1 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 2, immagine 2 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 2, immagine 3 di 3
    • Insert a spudger in between the bezel and display, at the top.

    • Move the tool around all sides of the bezel.

    • With your finger, lift the inside part of the bezel.

    • Pull the bezel back; it will pop-off.

  3. HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 3, immagine 1 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 3, immagine 2 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 3, immagine 3 di 3
    • Remove the four 2.75 mm screws using a Phillips #1 screwdriver

    • Lift the screen using a spudger.

  4. HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 4, immagine 1 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 4, immagine 2 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 4, immagine 3 di 3
    • Lifting the tape on the back of the screen and peel it off.

    • Remove the connection.

  5. HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 5, immagine 1 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 5, immagine 2 di 3 HP Star Wars Special Edition 15-an051dx Screen Replacement: passo 5, immagine 3 di 3
    • Connect the new screen using the 30 pin cable.

    • Put the screen in place.

Conclusione

Enjoy your new screen!


Take your e-waste to an R2 or e-Stewards certified recycler.

Altre 2 persone hanno completato questa guida.

Team

Gateway, Team 1-2, Pee Fall 2022 Membro di Gateway, Team 1-2, Pee Fall 2022

GCC-PEE-F22S1G2

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 13

Tutti i Tempi: 227