Salta al contenuto principale

Introduzione

Use this guide to replace the home button in your HP ElitePad 900.

  1. Unscrew the two 2.8mm Phillips #000 screws near the power connector.
    • Unscrew the two 2.8mm Phillips #000 screws near the power connector.

  2. Use a suction cup to pull the display assembly up. Use a suction cup to pull the display assembly up.
    • Use a suction cup to pull the display assembly up.

  3. Use the tip of a spudger to disconnect the two display ZIF connectors. Use the tip of a spudger to disconnect the two display ZIF connectors.
    • Use the tip of a spudger to disconnect the two display ZIF connectors.

  4. Remove the two 2.4mm Phillips #000 screws.
    • Remove the two 2.4mm Phillips #000 screws.

  5. Lift metal bracket along with blue connector.
    • Lift metal bracket along with blue connector.

  6. Replace connector.
    • Replace connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kyle Marques

Membro da: 03/09/2015

847 Reputazione

6 Guide realizzate

Team

USF Tampa, Team 12-4, Blackwell Fall 2015 Membro di USF Tampa, Team 12-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G4

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 523