Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
At the top of the outer frame, insert the plastic spudger into the groove in the center.
-
Lever the frame gently until it pops out of the case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #00 screwdriver to remove the four screws around the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pull from both ends of the casing to separate the front and back panels.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently unplug the white cable connector using either your fingers or tweezers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully expose both halves of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #00 screwdriver to remove the two screws from the battery bracket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully peel the metal bracket away from the battery.
-
Pull the battery away from the back cover.
-
Desolder the wires from the speakers using a soldering iron.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use the spudger to pry the speakers from the outer casing.
-
Once removed, you may use a soldering iron to remove the wires from the speakers.
-