Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift and twist the battery cover release 90 degrees counterclockwise on the back of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift battery release up to remove battery cover.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the six 10 mm screws on the back of the device with a Phillips #0 screwdriver.
-
Flip the back panel over to view the green electronics board (the PCB) and the PCB covering.
-
Remove the black, yellow, blue, and red wires connected to the PCB with light force.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the spudger in the bottom right corner of the black PCB cover and pry the corner out.
-
The previous step will need to be done to the other three corners.
-
Pull the black PCB board out of the GPSMap 60 CSx.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully use a spudger to lift the PCB a few centimeters.
-
Pull the PCB out towards the bottom of the GPSMap 60CSx.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Take the front panel and apply light force to the buttons.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.