Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the six 10 mm screws on the back of the device with a Phillips #0 screwdriver. Flip the back panel over to view the green electronics board (the PCB) and the PCB covering.
  • Remove the six 10 mm screws on the back of the device with a Phillips #0 screwdriver.

  • Flip the back panel over to view the green electronics board (the PCB) and the PCB covering.

  • Remove the black, yellow, blue, and red wires connected to the PCB with light force.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.