Aggiusta la tua roba Comunità Store

GameSir X2 Type-C Left Trigger Replacement

Introduzione

The trigger is a button on the top of the GameSir X2 Type-C. It allows a user to produce various outputs depending on the game the user is playing.

If you need to replace the left trigger on your controller, follow this replacement guide. Possible reasons for replacing the trigger would be if it is unresponsive to input or has a lagging response. Before replacing the trigger, review Troubleshooting Page.

Cosa ti serve

  1. GameSir X2 Type-C Left Trigger Replacement, Back Cover: passo 1, immagine 1 di 2 GameSir X2 Type-C Left Trigger Replacement, Back Cover: passo 1, immagine 2 di 2

    • Turn the device so the back faces you.

    Traduci

  2. GameSir X2 Type-C Left Trigger Replacement: passo 2, immagine 1 di 2 GameSir X2 Type-C Left Trigger Replacement: passo 2, immagine 2 di 2

    • Remove the eight 6 mm T6 Torx screws.

    Traduci

  3. GameSir X2 Type-C Left Trigger Replacement: passo 3, immagine 1 di 1

    • Use a straight edge to remove the rubber pad on the front of the device.

    Traduci

  5. GameSir X2 Type-C Left Trigger Replacement: passo 4, immagine 1 di 2 GameSir X2 Type-C Left Trigger Replacement: passo 4, immagine 2 di 2

    • Remove the four 4.5 mm screws with a Phillips #000 screwdriver.

    Traduci

  6. GameSir X2 Type-C Left Trigger Replacement: passo 5, immagine 1 di 2 GameSir X2 Type-C Left Trigger Replacement: passo 5, immagine 2 di 2

    • Use a straight edge to pry open the controller, following the seam on the controller.

    • Some force is necessary, but be careful not to damage any of the clips holding the controller together.

    Traduci

  7. GameSir X2 Type-C Left Trigger Replacement, Left Trigger: passo 6, immagine 1 di 2 GameSir X2 Type-C Left Trigger Replacement, Left Trigger: passo 6, immagine 2 di 2

    • Remove the two 6mm screws that secure the trigger assembly with a Phillips #000 screwdriver.

    Traduci

  8. GameSir X2 Type-C Left Trigger Replacement: passo 7, immagine 1 di 2 GameSir X2 Type-C Left Trigger Replacement: passo 7, immagine 2 di 2

    • Remove the joystick cover.

    Traduci

  9. GameSir X2 Type-C Left Trigger Replacement: passo 8, immagine 1 di 2 GameSir X2 Type-C Left Trigger Replacement: passo 8, immagine 2 di 2

    • Lift the trigger assembly away from the device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 31

Tutti i Tempi: 61